Matters needing attention after the cross-cutting machine is finished
After the cross-cutting machine is finished, clean up the ash and paper scraps on the equipment in time, check the cutters and sharpening wheels, drain the oil and water in the high water device and the gas storage tank, and check whether there is any abnormality in the running parts.Then, cut off the power and maintain the computer operating system in accordance with the operating requirements of the manual.
To do good maintenance and maintenance work. First of all, daily maintenance must be in place. The principle is to lubricate, clean, and clean (no dust, no debris) in place to ensure that the sliding part of the equipment is in good condition.
Followed by maintenance work, regular and irregular inspections of rotating parts (especially real-time monitoring of wearing parts). Implement regular adjustments, regular replacements, and make detailed records to achieve the purpose of extending the service life of the equipment. The electrical parts shall be cleaned and inspected regularly to eliminate hidden dangers in time.
Use high quality slitters and crosscutters. Improving the technical quality and level of the operating personnel, and must be responsible for the operation of the control part. No one can operate it without permission.
For more details, please pay attention to Hubei Luotie Machinery Co., Ltd. http://n80bike.com/, we will update the content from time to time.